Hello,
I've just bough D7500 (replacement for my old D5000).
Since beginning it has an issue... camera freeze almost completely after second raise of the built-in flash and this last till camera restart (off and back on) or till the energy safer function activation.
For me this looks like a software issue, some conditions must occur to happen - firmware?
Therefore I would like to ask other owners of D7500 if they face it too... so now some details how to trigger it...
1. Turn on the camera
2. Raise up the builtin flash
3. Take a photo with the flash (one is sufficient; without taking the photo with flash, you can close-raise the flash as many times as you want - no issue)
4. Close the built-in flash
5. Again try to raise the built-in flash - in my case it will not, something like button doesn't work
6. Try to take the photo, it will not and the camera is almost frozen - the LCD turns off, just blinks when pressing any button on the front panel (these by shutter, Fx works, results you can see on the small LCD).
Issue will last till...
* energy safer system activation (everything will be fine till trying to again raise the builtin flash
* turn off/on the camera (then procedure would have to be repeated since beginning to trigger the problem again)
Is this problem of my camera only or more/all of D7500?
Firmware 1.00 (there isn't any update available)