ebay shows the description as APS-C CMOS DX format sensor in the heading but when you go to full detail of the camera it says CMOS DX format sensor only, the question is why the heading and full description not the same, is this a gimmick? give your views.
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 25 May 2017 - 01:16 PM
#3
Posted 26 May 2017 - 06:43 AM
#4
Posted 26 May 2017 - 06:49 AM
Because they are functionally so similar? I don't know, but it is not unusual to see both terms in the same heading to drive more traffic for the listing (or something like that).
#5
Posted 27 May 2017 - 06:51 AM
The vendor is wrong. Why using such claim but it is not true. Why Nikon allow this gimmick that will destroy its reputation.
#6
Posted 27 May 2017 - 06:55 AM
#7
Posted 04 June 2017 - 11:15 PM
Hi there,
I just bought a D3300 2 weeks ago. I was using a 16 GB SD. Yesterday, I tried a 200 GB SD, it did read, saved photos as I shot some. Official says it supports upto 64 GB. But how is it possibly reads a 200 GB SD as well? Or it might corrupt if continue to use?
Thanks,
Erfan
#8
Posted 07 June 2017 - 12:45 PM
I try to limit my cards to no more than 32GB for my FX camera and 16GB for my DX camera. I've rarely run out of space even when shooting RAW and even then I just pop another card in the camera and keep on shooting. I know that others here use larger cards but I prefer not to.
Your 200GB card might work fine or it might crap out and take all your stuff with it. If you dump your photos to your computer after every shoot or at least every day, you might be OK.
--Ron
#9
Posted 07 June 2017 - 02:19 PM
While this may sound complex, it means that the card may work up to a certain load capacity (which can be different from the max (200GB) capacity). It MAY also mean that the addressing system would support all possible addresses on your 200GB card.
In general, while it may work, you are better off to take account of the indications given by Nikon, even if it might be possible that different/larger capacities work.
- Ron likes this
#10
Posted 07 June 2017 - 03:16 PM
I tend to use lower capacity cards just so if a card fails, I loose less data. I would rather change out cards more often than take the chance of loosing everything. Just me, YMMV.