I am a new user of Nikon cameras. I am currently learning to use my Z72. I have the MB-N11 grip with 2 EL-EN15c batteries installed.
How do I switch between battery #1 and #2.? ( without removing them )
Jump to content
thanks guys for the info.! I guess it is not an issue, if, when battery "A" is depleted, the camera automatically switches to battery "B". I was curious, because on dslr's I've used in the past, I was able to choose which battery I wanted active by using a setting in the menu.
ahh very good point. thanks Merco. One other question while I'm in here. I set up my Nikon U1 mode for exposure bracketing, 5 frames. ( 5fps ) My previous camera was a Pentax K-3. On that camera, it Would save my 5 FPS to my U1 bracketing mode. I cannot seem to get my Z7 to save that "continuous" mode... After I dial in my U1 mode I still need to go down to ( right bottom ) and select "Hi continuous". Am I doing something incorrect.? Or does the Nikon not save the 5 FPS portion of of my AE bracketing mode.? Is that something I will always have to set-up manually.?
I don't know as I have never bothered with setting up the U! and U2 modes. I switch between three generations of digital bodies and they are all different when it comes to how the user settings work.
For bracketing, I have assigned BKT to the red video record button on bodies that don't have s dedicated BKT button. I am usually in one of the Continuous High modes anyway...
Merco, appreciate all your help. I have 1 more question ( at least for today ) On my LCD screen (bottom left) it shows: shutter speed / f-stop. When I am in either "manual mode" OR "shutter priority mode" it shows the word: Time where the shutter speed should be. When in those 2 modes my camera will Not fire Or is delayed in firing. This does Not happen in: "aperture mode" , "program mode" Or "auto mode".
Trying find where in the menu I can reset this.
Camera and Photo Help →
Technical Troubleshooting →
Nikon Cameras →
Nikon Film SLRs →
Strobist Corner →