The ISO-A is havig issues, it changes the configuration by itslef, I set it to 200 and it goes right up to 8000 or 10000 even, it changes either alone or after I touch any other type of setting, and sometimes even while I'm taking photos. Does anyone know what are the potential solutions for this? I was thinking a full reset for this camera, would that be the solution?
Welcome to NikonForums.com
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
D5300 ISO desconfigurates by itself
Started by blackstonerk, May 30 2019 08:24 AM
d5300 iso configuration
#1
Posted 30 May 2019 - 08:24 AM
#2
Posted 01 June 2019 - 05:47 PM
Check your menu and see if ISO is set to Auto, if it is then what you see is normal. The ISO will adjust depending on the scene/light.
How to Control the ISO on Your Nikon D5300 - dummies
#3
Posted 01 June 2019 - 11:09 PM
ISO-A stands for Auto mode. In auto mode the camera will choose from the « minimum » set value (fi. you set it to 200) a higher ISO value if needed, combined to the Aperture or Shutterspeed setting, in order to achieve a good exposure.
In the camera Menu you should have a setting called ISO sensitivity setting. Here you can allow for the mode to be Auto. Moreover you can set a maximum acceptable ISO value to you (as well as a minimum exprcted shutter speed).
The maximum acceptable value to you and your camera is when you feel the grain starts to be to important.
My proposal to you is to leave ISO-A on, and set the default to 100 and the maximum somewhere close to 800-1600; and min shutterspeed 1/60.
In the camera Menu you should have a setting called ISO sensitivity setting. Here you can allow for the mode to be Auto. Moreover you can set a maximum acceptable ISO value to you (as well as a minimum exprcted shutter speed).
The maximum acceptable value to you and your camera is when you feel the grain starts to be to important.
My proposal to you is to leave ISO-A on, and set the default to 100 and the maximum somewhere close to 800-1600; and min shutterspeed 1/60.
#4
Posted 01 June 2019 - 11:27 PM
Also tagged with one or more of these keywords: d5300, iso, configuration
|
Camera and Photo Help →
Technical Troubleshooting →
Neewer Speedlite FlashStarted by 56up, 11 Apr 2024 d5300, syncing, speedlite |
|
||
Camera and Photo Help →
Beginner Questions →
ISO in ManualStarted by mulvennk, 05 Dec 2021 iso, manual |
|
|||
Camera and Photo Help →
Beginner Questions →
D5300 - No live view on External MonitorStarted by nikonkenjee, 24 Nov 2021 d5300, external monitor and 1 more... |
|
|||
Camera and Photo Help →
Beginner Questions →
Unable to use low Shutterspeed with high ISOStarted by Maggio47, 05 Aug 2021 shutterspeed, iso, coolpix |
|
|||
Camera and Photo Help →
Beginner Questions →
Unable to use low Shutterspeed with high ISOStarted by Maggio47, 04 Aug 2021 shutterspeed, iso, coolpixp1000 |
|